RESTRAINT ENGINEERED DESIGNS

Assembly Instructions

RED Lightweight Sling Frame

Assembly


  1. Insert fully the four horizontal bars into the X shaped centre connection piece and clamp by tightening the four plastic wing nuts.
  2. Insert four vertical tubes (without rubber feet) into the end of each horizontal bar, depress each button clip to engage the tubes and align the holes in the tube with the button clip to lock in position.
  3. Insert the remaining four vertical tubes (with rubber feet) into the end of each previously assembled vertical tube, depress each button clip to engage the tubes and align the holes in the tube with the button clip to lock in position.
  4. Your RED Lightweight frame is now ready for use, for safety and the best possible experience only use RED Slings and attachment Accessories.

  5. IMPORTANT When using the frame, do not attempt to push it across the floor. Ensure that all four feet remain in contact with the floor. For rough and aggressive play, you need to use the RED Heavy Duty Frame.

Disassembly


To disassemble the Frame, simply follow the assembly procedure in reverse.

Download these instructions as a PDF to save or print
images/teases/ts.png images/teases/ts.png SERIOUS FUCKING GEAR